Key takeaways
- Six areas are worth restocking before the sale: storeys and roofs, frames and comb, excluders and mats, protective gear, inspection tools, and your varroa and AFB kit.
- Any storey with rot, gaps or a roof that no longer sits flat should be replaced before it goes back on a hive.
- Inspect stored gear for AFB signs, and treat unknown secondhand equipment as a risk.
- Sorting your list before Black Friday on 27 November means you can order the moment the sale opens.
How to spot what needs replacing
The fastest way to see what needs replacing is to bring everything into one place and ask one question of each item: would it let me down during an inspection or harvest this season?
Pick a dry afternoon and pull out every spare storey, frame, excluder, feeder, roof and tool, plus your suit, gloves and extraction gear. Sort everything into three groups: ready, repair and replace.
The ready group goes back on the shelf. Book the repairs in for a quiet weekend. The replace group becomes your Black Friday list.
Late November is the right time to do this. Colonies are near peak strength and need room. The first harvest is approaching in many regions. Varroa numbers are rising with the brood. Equipment that fails now fails at the busiest point of the year.
Storeys, roofs and bottom boards
A storey is ready if every corner is sound, the timber is protected and it sits flush with the storeys above and below.
Press a hive tool into any dark or soft patch, particularly along the bottom edge where water collects. Timber that gives way has rot. Look along stacked storeys for gaps, which let in rain, cold and robbers.
Check the coating too. Flaking paint or bare wax dipped timber soaks up moisture, so recoat anything you plan to keep before the season gets busy.
Roofs must sit flat and seal well. On exposed sites, a light duty roof that keeps lifting is worth upgrading to medium or heavy duty.
Bottom boards sit closest to the damp ground and carry the full weight of the hive. Rot here makes a heavy hive unsafe to move.
Replacements are in assembled storeys, kitset storeys and RTG boxes.
Frames and comb
A frame is ready if the lugs are whole, the frame is square and the comb or foundation is firmly held.
Look for these faults:
- Broken lugs, which let frames drop into the storey.
- Loose wires, which let beeswax foundation sag in warm weather.
- Twisted frames, which leave uneven gaps that bees fill with brace comb.
Brood comb darkens as each generation of bees is raised in it. Many beekeepers retire the oldest, darkest brood frames each season and replace them with new beeswax or plastic foundation. Count how many you plan to swap, because each one needs a replacement.
Stored comb also needs checking for wax moth. Look for webbing, tunnels and larvae in the frame corners. Badly damaged comb is better melted down than returned to a hive. A solar wax melter turns old comb into clean wax with no power cost. For more on this pest, read watching out for wax moths.
Replacement frames are in plastic frames and wooden frames.
Queen excluders and hive mats
An excluder is ready if it lies flat and its slots are clear. Hold it to the light. Bent sections can let a queen through, and slots packed with wax or propolis slow the workers.
Metal excluders can usually be scraped clean. For beekeepers with several hives, an excluder and frame cleaner speeds up the job. Plastic excluders that have warped are better replaced.
Count your excluders against the number of hives that will carry honey supers this season. Replacements are in metal and plastic excluders.
Hive mats keep heat in and condensation off the cluster. A mat is ready if it is whole, dry and lifts cleanly. Cracked or mouldy mats are cheap to replace, and mat components are available if you build your own.
Protective gear
Protective gear passes the check only if it stops every sting. One gap is enough to fail it.
Zip the suit or jacket fully and look for gaps where the veil meets the body, at the wrists and at the ankles. Replace a zip that sticks or splits before the season, not in the apiary.
Hold the veil to the light and look for small tears. Check that the mesh still stands clear of your face. On vented gear, check that the mesh layers are intact, since a torn inner layer can let bees through.
Gloves stiffen with propolis and wax over a season. If they no longer flex, replace them, because clumsy handling makes colonies defensive.
Wash your gear before the busy months. Venom and alarm scent build up on fabric.
Replacements are in beesuits, vented jackets, gloves and hats, veils and hoods.
Smoker, hive tool and brush
Test these tools the way you use them in the apiary.
Light the smoker and work it for five minutes. If it goes out, leaks from the seams or the bellows feel weak, it needs repair or replacing. New bellows can revive an old smoker, while a rusted firebox calls for a new smoker. Top up smoker fuel at the same time.
A hive tool is ready if its edges are firm and its ends are straight. Keep a spare in the vehicle. Clean your hive tools between apiaries as part of good hygiene practice.
A brush is ready if the bristles are soft and clean. Matted bristles drag bees instead of sweeping them.
Your varroa and AFB kit
Your hive health kit is ready if you can test for varroa today, treat this season if needed and recognise AFB when you see it.
Varroa has been in New Zealand since 2000, and spring brood lets mite numbers climb quickly. Check that you have what you need for sugar shakes or alcohol washes, or look at the diagnostic testing range.
Check any stored treatments for expiry dates and storage conditions. Plan this season’s rotation between treatment types rather than repeating last year’s product by habit. The varroa treatments range covers organic and synthetic options. Some beekeepers also use drone frames as part of an integrated approach.
AFB needs particular care. Under New Zealand’s American Foulbrood Pest Management Plan, apiaries must be registered and colonies found with AFB must be destroyed. Inspect stored brood frames for signs of disease before reusing them. Treat any secondhand gear of unknown history as a risk, because AFB spores survive in woodware for many years. Ecrotek’s guide about American foulbrood disease covers what to look for.
Extraction gear
Extraction gear is ready if it runs smoothly, seals properly and is clean, and you want to know that before your supers fill.
Spin the extractor empty and listen for worn bearings. Check that the cage turns freely. Run water through to test the honey gate for leaks. Replacements are in extractor parts.
Inspect uncappers, uncapping trays and strainers. Wash anything stored with honey residue, which attracts pests and can taint the new crop.
Count your polypails and jars and containers against last season’s harvest, and add a margin in case the flow is strong.
Your Black Friday shopping list
|
What you found |
What to buy |
|
Rot, gaps or a lifting roof |
Storeys and roofs |
|
Broken lugs or very dark brood comb |
Frames and foundation |
|
Bent or clogged excluders |
Queen excluders |
|
A torn veil, sticking zip or stiff gloves |
Protective gear |
|
A weak smoker or missing hive tool |
Equipment |
|
Expired treatments or no testing method |
Health and treatment |
|
Worn bearings or a leaking gate |
Extraction |
Write sizes, depths and quantities on every line. Then read Black Friday Wishlist: What Every Beekeeper Should Stock Up On This Spring to finish your list.
Ecrotek NZ’s Black Friday sale starts on 27 November 2026 and Cyber Monday on 30 November. Have your list ready and you can order in minutes when the sale opens. Prices are shown excluding GST, and the offers are on the Black Friday and Cyber Monday page.
FAQs
Q: How often should NZ beekeepers check their equipment?
A: Do a full check at least once a year, ideally before spring build up, and a second check of extraction gear before harvest. Check smaller items such as gloves, smokers and hive tools whenever a problem shows up during inspections.
Q: How do I check stored frames for AFB?
A: Look closely at stored brood comb for signs of disease before reusing it. Under New Zealand’s American Foulbrood Pest Management Plan, colonies found with AFB must be destroyed. If you are unsure about any frame, do not put it back into a hive. Ecrotek’s AFB guide explains the signs to look for.
Q: When should I replace a hive roof?
A: Replace a roof that no longer sits flat, lets in water or lifts in strong wind. On exposed or windy sites, upgrading from light duty to a medium or heavy duty roof gives better protection.
Q: Is it safe to reuse old brood comb?
A: Comb in good condition can be reused, but many beekeepers retire the oldest, darkest brood frames each season. Never reuse comb you suspect may carry AFB, and melt down comb badly damaged by wax moth.
Q: When is Ecrotek NZ’s Black Friday sale?
A: Black Friday starts on Friday 27 November 2026, and Cyber Monday starts on Monday 30 November 2026. Each event has separate offers, and prices on the Ecrotek NZ website are shown excluding GST.